Published at Tuesday, August 07th, 2018 - 13:56:46 PM. . By Josie Early.
First take the bracket that will be fitted to the left hand corner of the window frame and place it flush against the frame of the window. It is important that you can see the open part of the bracket. Once you have it in the right position use a pencil or pen to mark where the holes in the bracket meet with the wall by the window. Take the bracket away and now with the right size bit fitted to the electric drill make the holes in the marked positions as this is where the screws will go.
After you have the blinds installed properly you should un-knot the tension chord so that it hangs down properly and then use it to see that the blinds move freely up and down. Hopefully this should happen without the blind coming out of the brackets. If they do move up and down freely now you can fit the closing rod to the blinds. This is very simple to do you just thread the hook at the top of the blinds through the hole in the rod. Now twist the rod in both directions to make sure that the blinds open and close correctly.
Any content, trademark’s, or other material that might be found on the Felipee Amanda website that is not Felipee Amanda’s property remains the copyright of its respective owner/s. In no way does Felipee Amanda claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Felipee Amanda. All Rights Reserved.