Published at Tuesday, August 07th, 2018 - 12:49:21 PM. . By Zendaya Almeida.
First take the bracket that will be fitted to the left hand corner of the window frame and place it flush against the frame of the window. It is important that you can see the open part of the bracket. Once you have it in the right position use a pencil or pen to mark where the holes in the bracket meet with the wall by the window. Take the bracket away and now with the right size bit fitted to the electric drill make the holes in the marked positions as this is where the screws will go.
First and foremost, probably one of the most important blind accessories is a cleat or a cord holdfast. A cleat can be a plastic or metal object with two projecting horns to which cords may be fastened by winding the cord around the horns, to keep them from slipping. A cord holdfast as the name depicts is used to hold the cords "fast" by winding the cord around a peg which is normally angled at about 45 degrees. So that when a blind, for example a venetian blind, is pulled up, the cords can be secured to the cleat or holdfast to prevent the blind from coming down.
Any content, trademark’s, or other material that might be found on the Felipee Amanda website that is not Felipee Amanda’s property remains the copyright of its respective owner/s. In no way does Felipee Amanda claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Felipee Amanda. All Rights Reserved.