Published at Tuesday, August 07th, 2018 - 12:56:23 PM. . By Josie Early.
First take the bracket that will be fitted to the left hand corner of the window frame and place it flush against the frame of the window. It is important that you can see the open part of the bracket. Once you have it in the right position use a pencil or pen to mark where the holes in the bracket meet with the wall by the window. Take the bracket away and now with the right size bit fitted to the electric drill make the holes in the marked positions as this is where the screws will go.
Tapes. These can be normally found in aluminum or window blinds. Unlike ladders, tapes run down the front part of the slats to glue them together. Bottom Rail. This is a vertical blind part that is used as an anchor to hold the binds together. This is located at the end of the window blind, and normally matches the window blind.
Any content, trademark’s, or other material that might be found on the Felipee Amanda website that is not Felipee Amanda’s property remains the copyright of its respective owner/s. In no way does Felipee Amanda claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Felipee Amanda. All Rights Reserved.