Published at Tuesday, August 07th, 2018 - 12:51:40 PM. . By Céline Tubbs.
After you have the blinds installed properly you should un-knot the tension chord so that it hangs down properly and then use it to see that the blinds move freely up and down. Hopefully this should happen without the blind coming out of the brackets. If they do move up and down freely now you can fit the closing rod to the blinds. This is very simple to do you just thread the hook at the top of the blinds through the hole in the rod. Now twist the rod in both directions to make sure that the blinds open and close correctly.
Now you take the bracket for the right hand side of the window and do the same as you did in step one. Again make sure that the open part of the bracket is facing towards you. Plus you need to ensure that the position of the holes for the right hand bracket are parallel with the holes on the left hand side and this is where you would use your spirit or laser level to check.
Any content, trademark’s, or other material that might be found on the Felipee Amanda website that is not Felipee Amanda’s property remains the copyright of its respective owner/s. In no way does Felipee Amanda claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Felipee Amanda. All Rights Reserved.